ALS 6100 Laser marking systemALS 6100 Laser marking system
Laser marking for plastics, PCB, stainless steel, aluminium. Flat, round surfaces or continuous tape roll to roll.
LASER GENERATOR
Laser generator
- AUREL Nd-Yag with acousto-optic Q-switch
- Wave lenght 1064 nm
- Power TEMoo CW 12W
- Multimode CW 40W
- Repetition rate Single pulse to 10 KHz
- Alignment either by HeNe Laser or through collimator
- All mirrors and optical components mounted on rails with micrometric adjustment
- Vertical and horizontal alignment of the Q-switch by micrometers
SPECIFICATION
Specification
| Working area | 110 x 100 mm (150 x 150 mm optional) |
| Resolution | 10 µm |
| Repeatibility | 30 µm |
| Writing speed | 350 chr/sec |
| Scanner speed | Scanlab Mod. Hurryscan |
| Computer | Pentium III 450 MHz, 128 Mb RAM, CD-rom, 15″ TFT Flat monitor, Keyboard with trackball, Windows 95/98 |
| Software | SAM Light SCAPS |
| I/O Interfacing signal | Start/Stop marking cycle (input) |
REQUIREMENTS
Requirements
| Electrical power | 3/380V – 20A – 50 Hz |
| Operating temperature | 10÷40°C |
| Humidity | 85% max |
