VS2025 High Precision screen printer for large substratesVS2025 High Precision screen printer for large substrates
Printing area up to 800 x 600 mm. Special fixture for flexible substrates. Roll-to-Roll automation.
STANDARD FEATURES
Standard Features
- Double squeegee head for the use of metal squeegees or rubber squeegees
- Squeegee drive actuator with DC motor and very smooth movement of the printing head
- Printing mode: Contact, Off Contact, Single Print, Double Print, Print & Flood, Delay after Print
- High precision and repeatability for fine-pitch and fine-line printing
- Motorized squeegee with programmable printing pressure and down stop
- X–Y–q adjustments by centesimal micrometers
- Motorized and programmable screen lift movement (Z axis) for the function “slow snap–off” very important on fine line printing
- PC control, Windows SW with menu programming of all printing parameters, diagnostic, data storage
- Screen holder and printing head lift for easy set up and cleaning
SPECIFICATIONS
| Specifications | |
| Print area | 790 x 600 mm (MAX) |
| Printing Stroke | 840 mm |
| Max squeegee width | 620 mm |
| Screen size | 1000 x 850 mm O.D. |
| Work holder table size | 840 x 640 mm |
| Vacuum area | 820 x 620 mm |
| Carriage repeatable | 0.025 mm |
| X-Y adjustment | 12.5 mm |
| Z adjustment (Screen height) | ± 6 mm |
| Theta adjustment (Rotation) | ± 3 degrees |
| Squeegee speed | 0 ÷ 300 mm/sec |
| Squeegee pressure | 1 ÷ 16 Kg |
| Height with cover | 1880 mm |
| Height to substrate | 900 mm |
| Approx. Weight | 600 Kg |
| Compressed air | 5 bar 100 NI/min |
| Power | 240V 1000W |
OPTIONS
Options
- Vacuum fixture for thin foils hold down
- Holes metallization or holes filling
- Clima control
- Vision system
- Automatic stencil cleaning
- PCB or foil cleaning station
- Roll-to-Roll printing
- Automatic handling system
